Вход 192.168.1.1 и 192.168.0.1 admin: как зайти в роутер

How to repair common routers and modem problems yourself

Here we will take an example of Linksys routers. All mojor routers of Linksys can be repaired and solved easily.

1. Restart the router and keep it ON
2. See if you can manage to get connected to the router and then Internet.
3. Check out for LED indicator on router representing internet connection.
4. Check if it is blinking.
5. Check if your modem is connected to the router.
6. Check if you can access router configuration setting panel by typing 192.168.1.1 and not 192.168.l.l in the address bar.

While checking these things many times users get confused when they have multiple WiFi connections and to be sure that you are connected to the exact router you are testing simple on and off the router and see which signal goes off and comes again.

No access to 192.168.1.1? This is how the router login works!

Despite entering the IP address 192.168.1.1 or 192.168.2.1 in the browser, the router login does not work? We bring you in 3 steps to the router menu. Nowadays it is much easier to set up a new router than to configure the old one. New WLAN routers come along with activated and already secured WLAN.

The password can usually be found on a small sticker on the bottom of the device. Some of these stickers even still have the user name, password and the default IP address – often 192.168.1.1, 192.168.2.1 or 192.168.0.1. With an older router, however, things look different. Or the password has been changed in the meantime. Our tips will help here.

3 steps: How to get access to your router

Use cable instead of WLAN (optional) If you can no longer log into your router via WLAN using 192.168.1.1, it is best to connect your computer and the router using a network Ethernet cable. A notebook computer is advantageous here, as you can carry it directly to the router – the cable may not be long enough to connect your desktop PC.

Find the IP address of the router Open the command line in Windows. The fastest way to do this is to press the Windows key and R simultaneously. Now type cmd in the line that opens and confirm. Now type ipconfig into the opened window and confirm again. Windows will then list all installed network adapters. This includes the current IP address of your router. It is the number behind the entry “Default gateway”. (Besides “ipconfig” there are, by the way, some other useful network commands with which you can analyze WLAN and router problems .)

Enter IP address correctly in your browser Now open your web browser and enter this number – in our case it was not 192.168.1.1 but 192.168.1.254 – in the address line. Confirm with Enter. Do not type http:// in front of it – otherwise you will only get an error message.

If you do not see the login screen of your router, for example the Fritzbox, at this point, it may be because the IP address has been entered manually. You can check this in the Windows Network and Sharing Center, located under Control Panel, Network and Internet (Windows 7). In Vista, Windows 8, and Windows 10, you’ll find the Center in a similar way.

Now click on “Change adapter settings” and right-click on the following connection to the router. Select “Properties” from the context menu. In the pop-up list, find the entry “Internet Protocol Version 4” and select “Properties”. Make sure that “Obtain IP address automatically” is selected. The same applies to the DNS server address.

Now repeat steps 2 and 3.

What you can do if you forgot router’s username and password

1. The router has by default username and password provided by the manufacturer.
2. If you have not altered the default username and password you can find them in above list.
3. If you can find uer manual of the router you can find default username and password inside it too.
4. You can try to find the details on router sticker where serial number and other details are printed.

If you have changed username and password of a router and forgot

Finding router reset button

1. You will now need to reset the router settings to factory settings.
2. Find the small hole around the modem or router with label “RESET”.
3. To flash the factory settings you will need to press and hold the button in side hole for minimum 10 seconds.
4. You can use something pointy like pen or toothpick.
5. Now once the router is restarted you will need to enter the IP 192.168.1.1 and not 192.168.l.l
6. and follow the default login username and password procedure.
7. Restoring to factory setting will wiped out all the configuration from router or modem so your Internet connection will need to be setup again.
8. Keep your ISP provided settings handy to get connected to Internet again. Experienced people can do this so try only if you have experience.

Router IP Lookup

To lookup the router IP from your PC follow these instructions:

Windows PC

1. Follow this route
2. Start > All Programs > Accessories > Command Prompt.
3. Now in the command prompt window enter following commands one by one
4. You will see something like this:

5. C:\Documents and Settings\administrator>

6. Thus here your default IP is 192.168.1.1 though it looks like 192.168.l.l

Unix and Linux

1. Open the termina. You can simply find it on the desktop or by searching it in the search bar.
2. Click Applications > System Tools > Terminal.
3. When terminal opens, type in following commands
4. These command will give you result like this
5. Thus again you can see the system gives the default IP address of router 192.168.l.l

Macintosh OS

1. Go to terminal and open it follow this route
2. Finder > Applications > Utilities > Terminal.app
3. Once the terminal is open input this commands
4. This would give you the following result
5. This shows the default IP address of router is 192.168.l.l

Router access still not working?

The firewall is to blame Probably a firewall is blocking access. Check if you have a separate firewall or one installed as part of your security suite. Allow IP access as an exception – or temporarily disable the firewall. Do not forget: You should reactivate the firewall afterwards. By the way, Windows Firewall should not be responsible for your problem. In the default settings, it lets you access the router without any problems.

Parental control software installed? Another stumbling block could be installed parental control software. The filter denies access to the router interface’s website. In this case, add the IP address as an exception or temporarily disable the software.

The browser blocks you A third possibility: A browser add-on or browser setting prevents access. Try another browser.

Tip: Instead of 192.168.1.1 or any other IP address, many routers allow you to enter clever shortcuts in the browser’s address bar. With Fritzboxes, for example, the router menu also appears when you enter fritz.box. Now you can easily access the Fritzbox. For the telecom router Speedport type speedport.ip. Unitymedia and KabelBW also use a different IP address. Netgear routers are accessible via http://www.routerlogin.com/. Asus routers can be reached via http://router.asus.com